Magic the Gathering Life Counter (Remix)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the Original to make it fit the 608ZZ bearings i had around.
- Ocena
- 5 / 5
- Polubienia
- 122
- Pobrania
- 579
- Wydruki
- 4
- Wyświetlenia
- 3889
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution
I rescaled the original model and made it fit the 608ZZ bearings I already had.
Successfully printed with 0.15mm resolution on Prusa Mini+.
The bearing sits a bit tight in the hole, but can be pressed in with some force (maybe with the help of a vise).
The peg on part 2 was not sitting tight enough for me, however a few carefully placed drops of glue on the inner ring made it hold extremely well.
I also added inlays for the digits to print in a different color. They don't seem to fit in the recesses at first, but as with the bearing, they can be carefully press-fitted using a vise.
Alternatively the slicer can be set to do a XY-compensation (~ -0.1mm, maybe less) to make them fit a bit easier (but they might too loose then and fall out, maybe apply some glue again).