Magic the Gathering Life Counter (Remix)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remixed the Original to make it fit the 608ZZ bearings i had around.
- Rating
- 5 / 5
- Likes
- 122
- Downloads
- 586
- Makes
- 4
- Views
- 3,908
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
I rescaled the original model and made it fit the 608ZZ bearings I already had.
Successfully printed with 0.15mm resolution on Prusa Mini+.
The bearing sits a bit tight in the hole, but can be pressed in with some force (maybe with the help of a vise).
The peg on part 2 was not sitting tight enough for me, however a few carefully placed drops of glue on the inner ring made it hold extremely well.
I also added inlays for the digits to print in a different color. They don't seem to fit in the recesses at first, but as with the bearing, they can be carefully press-fitted using a vise.
Alternatively the slicer can be set to do a XY-compensation (~ -0.1mm, maybe less) to make them fit a bit easier (but they might too loose then and fall out, maybe apply some glue again).