Latching box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
twist top latch box
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 61
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
Assembly:
Start with the spring and snap the rack guide then gear onto the hex pin.
To mesh in the racks (the straight latch pins with gear teeth) you're going to preload the spring then place them in the guide slots.
twist the hex pin counterclockwise
should load the spring about one gear tooth over the resting state
place the racks into the guide meshing with the central gear
spring should be pushing the gear and racks clockwise
should be tight fit on the first but the first rack should hold the gear in place making the others easier to place
use the knob to rotate the hex peg if you're having difficulty
Place the lid on top of the assembly so far. Pegs of the spring should snap into holes on the lid.
Snap the knob onto the hex pin that should be sticking out the top of the lid
Superglue the top assembly together making sure the racks are still free to move if you twist the knob.
if superglue pools on the inside of the lid some sanding may be required for smooth mating with the body
Let dry then you can snap the top assembly to the body of your choice.