Gypsum plasterboard/drywall holder support tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple tool that helps with drywall ceilings especially when you work alone.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 529
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a simple tool that helps with drywall ceilings especially when you work alone. You screw in fist plasterboard then slide holder onto one of the screws and then when mounting second plasterboard instead of having to hold it all by yourself you slide it onto the holder that supports it on one of its sides.
Once plasterboard is secured you simply slide holder tool off and continue work.
It helps with board positioning and forces a 2,5mm gap between plasterboards for better filler adhesion.
The hole diameter is big enough so that whole TN 3,5 screw can go through so you can slide it in and out without having to remove screw. Holder is 10mm thick so for 12,5mm plasterboards it's best used with TN 3,5x35mm screws.
Design includes two variants for 12,5mm and 9,5mm thick boards. For 12,5mm variant I also include 3MF project for PrusaSlicer with custom infill modifiers to make print stronger