Liczymy pasujące modele…
If you find this file valuable a $1 Venmo donation would be awesome! Thank you! Designed to work with two 1.5-inch drywall or wood screws. Run the screws in and out of the clips a few times to reduce friction. Don't overtighten or use a…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It fits on a 10mm bit holder, I have not tested the length. But you can easily scale the height up to adjust the length. The fit was tight for me but that is good so no clue needed, also can use the drill to push it in while rotating.…
Ramka (puszka) elektryczna, do ściany z kartongipsu, gdy nie potrzeba (lub nie chcemy) mieć tylnej części puszki, by mieć np pełny dostęp do przestrzeni za ścianą (np do umieszczenia tam elektroniki smart home) Wymiarowana pod typowy…
Ramka (puszka) elektryczna, do ściany z kartongipsu, gdy nie potrzeba (lub nie chcemy) mieć tylnej części puszki, by mieć np pełny dostęp do przestrzeni za ścianą (np do umieszczenia tam elektroniki smart home) Wymiarowana pod typowy…
Wersja głębsza, solidniejsza, z możliwością ustawiania obok siebie kolejnych puszek (standardowy rozstaw otworów na kolejne gniazdka/włączniki - 72mm). Plus dodatkowe narzędzie do celowania otwornicą co 72mm. Ramka (puszka) elektryczna,…
I didn't see any hooks heavy duty enough to hang my full backpack with so I designed this one. It uses 3x 1.5 in 15 gauge finishing nails at an angle to distribute the load. the nails measure about 1.83 mm in diameter. Print on it's side…
Ramka (puszka) elektryczna, do ściany z kartongipsu, gdy nie potrzeba (lub nie chcemy) mieć tylnej części puszki, by mieć np pełny dostęp do przestrzeni za ścianą (np do umieszczenia tam elektroniki smart home) Wymiarowana pod typowy…
This is one of those "don't ask" situations where a friend asked if I can help. This is the result. Printing: no supports needed
I used this to hold a swinging frame to the wall. I glued an 8-mm neodymium magnet in the back side and screwed it into a drilled hole in the drywall.
печать из материала ABS или PETG @сопло 0,4 мм you will need 2 bolts and 2 nuts, which are best soldered
These models allow you to cover up a 2.5" diameter hole saw hole in drywall. They have an opening for routing cables through the hole.. There are two variants, for 5/8" and ½" thick drywall. This was designed in Fusion 360, you can get…
The parts are designed for telescopic rod Güde VT 290 but this rod is a generic chinese tool sold under various different brands so the parts might be compatible with other rods too. Boot is designed for a ball with 19.5mm diameter. Both…
I've seen a variety of methods for printing reinforced drywall anchors, but haven't found one that printed reliably on my printer and did the job. So I've borrowed some ideas from those other places and created my own version in OpenSCAD.…
I needed a visitation door for some pipes i have behind a drawer in the bathroom. Unfortunately, i could not find anything on the market that would actually slide, so it would not interfere with the drawer cabinet. You can see the…
I printed the threaded section (the part that goes into the wall) from the original file scaled to 100.5% on the X and Y axes for easier installation. You need M3 heated insert, screws and washers
Install your Unify AP on celling without new holls. Just use one of halogen lamp fixture. Fast and secure. OpenSCAD model is fully customisable. Secure adapter in lamp fixture with 2 small screws. Monting plate from Unify AP secure with 4…
Drywall Outlet Box Compensation Ring (68 mm) Everyone knows the problem: when the hole for a drywall outlet box is drilled slightly crooked or uneven, the electrical box can get pulled too far into the wall opening. This compensation ring…
Specially made for cutting ClarkDietrich Mid-Flex corner tape, that has a plastic reinforcement, but will probably work on other tapes as well. 45 degree miter for door and window openings, and the other side can be used for a clean 90…
This clip makes it easy to use a 6.5 mm drywall sheet in the 10mm grooves on door and window frames. The clip will guide the drywall into the groove and also fills out the extra space so the visible side is nice and flush.
I have a finicky dryer vent connection that I needed to be able to access to secure, and also to open up and clean, and the easiest way to access it was to cut a hold in the drywall. So, I made a 20cm x 20cm hole, knowing that this was…
Drywall anchor to hang light objects on drywall without a 2x4 stud. Size your screw so that it digs into the top hole, and will split the anchor as it is screwed in. Drill ¼" hole for the anchor, use #6 size screw 0.2mm layer height with…
Drywall Gun Collated Magazine Attachment - not sure which model (Looks similar to Hilti SMD collated magazines attachments - leave a comment if you know what this is for) - a friend asked me to make a copy as they are no longer being sold…
Cleaning up my media cables I needed a grommet to fill up the hole I created for wire fishing. This was a grommet I made to fill the ½ In hole I was passing the speaker wire through. Fits in ½ In hole Inner Hole diameter ¼ In Quick and…
3-Gang Electrical Bracket for Drywall - @claylinco generously made some variants and mods to the single gang file. There are now 2, 3 & 4 gang brackets! “I've modified it to have center markers and holes to mark the cut line on the wall.”…
4-Gang Electrical Bracket for Drywall - @claylinco generously made some variants and mods to the single gang file. There are now 2, 3 & 4 gang brackets! “I've modified it to have center markers and holes to mark the cut line on the wall.”…
the original wall hooks i designed were meant to be printed vertically and to use #10 wood screws for mounting. these ones are designed for 8 gauge drywall screws and can be printed horizontally for better strength.
DON'T FORGET THE BRIM I needed a cover for my yato 3134 drywall saw so i made it :) Blade length: 160 mm I hope you like it :) And dont forget the reviews with photos :) Thanks and have a good day
A simple drywall box cutter template for two box with 72 mm distance. You need a 15x40 leveller bubble. like this → Have anice day :)
This is a simple sheath for the hatchet end of an Estwing drywall hammer. prints without supports, and retains nicely. I made mine in PETG. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: any PETG Category: Hand…
Instructions: Drill a 20 mm hole through the wall Choose the "long" part according to the thickness of your wall Insert the "short" part on one side, and the long part on the other Fasten with a 3 mm wood screw that's long enough to reach…
Need a clean way to repair drywall without screws or mesh? Need it to be perfectly level for minimal joint compound/mud? Too many times I find that drywall fixes make uneven surfaces, so this is the fix you need. Please note it is a…
Can be scaled down as needed. I have one that's 75% and one that's 100%. See picture --- I needed a pan for drywalling, and it was cheaper to print than buy one. I made it with all rounded corners to make it easy to clean- no more…
Suggestions for improvement: Perhaps a thicker and slightly larger diameter cover. Maybe a slightly longer thread.
This fixture is used to mount a Milwaukee 18V battery using #6 drywall screws. Print settings that I used were 0.8mm nozzle, 15% infill, 1 perimeter, and cubic supports. This required sanding some features to improve the ease of sliding…
I needed to clean up/fix a couple of holes in my bathroom wall where I used to have a towel rack. The holes were larger than just a small screw hole as I had used screw in anchor nuts. Also since the holes were through existing wall paper…
I used this to hold a swinging frame to the wall. I glued an 8-mm neodymium magnet in the back side and screwed it into a drilled hole in the drywall.
he green he monkey and he love eating your drywall that's all I can come up with
печать из материала ABS или PETG @сопло 0,4 мм you will need 2 bolts and 2 nuts, which are best soldered
Simple drywall gromets for cable management, there are a closed, open and 2 cables (8mm) version. It fit in a 2in hole. Designed for 1/2 drywall Enjoy! Category: Household Supplies
This is a VESA 100mm flush wall mount for tv/monitor. I made 2 styles : *Type A : Requires only a hole in the wall, it has a 'hook' system. *Type B : Requires 8 screws to fix it in the wall, plus anchors or pieces of wood. It's usefull if…
Spacers to determine the distance when milling plasterboard. The first positions the milling machine 30 mm from the rail, the second one another 26 mm for the next milling. Two-color version
Simply place in outlet box and put your drywall over the top. Marker will push through the sheet-rock. Then Router or cut out your box. You will need supports for the tip. Recommend printing in ASA or better. This is V1 Leave feedback for…
Festool D27 DM-AS/CT and osVac Neo M32/M40 adapters to Bosch C35. I modeled the adapter myself and tested it until it fits perfectly! Because of the grip surface you can easily remove the adapter. OsVac M40 and Festool D27 combi-adapter…
Print with whatever you want. A simple tool that is easy to print.
I hit a stud with a drywall anchor and cleanly chewed a 1/2in hole into the wall. This print fills the hole and allows you to screw a 4mm diameter woodscrew directly into the stud. My designs are released under a public domain license:…
These models allow you to cover up a 2.5" diameter hole saw hole in drywall. They have an opening for routing cables through the hole.. There are two variants, for 5/8" and ½" thick drywall. This was designed in Fusion 360, you can get…
Added a .step file for modifying the dust port to your own dust collection system.
Installation often requires assistance. This device makes it easier to do the job alone.
I could not find an off-the-shelf drywall access cover large enough for a hole I cut in my ceiling for waterline access. Therefore, I designed this spring-loaded 2-piece cover. It is designed to fully conceal a 6" x 16" rectangular hole,…
This is a spotlight for a GU10 bulb, which is mounted outside the thread. It is easy to print and looks clean. Dimensions: 75x75mm. 4 screws (4mm), a GU10 bulb socket are needed for assembly. SIZE: Box: 75x75mm Plate: 75x75mm Gypsum…
MY NEW DRYWALL ANCHOR INSPIRED BY https://paulbhardware.com/snapskru-drywall-anchor-8x1-1-2-snap30011 I ADDED A BIT TIP TO IT AND IT IS ALSO DESIGNED TO HAVE A WIDER OUTER RING TO MAKE FOR A TIGHTER FIT TO THE WALL. PRINT WITH PETG AND AT…
I designed this parametric access hatch specifically to be inserted into drywall (plasterboard) panels , particularly for ceiling installations . It provides a clean and practical solution for creating an inspection opening , allowing…
If you find my work useful you can: paypal.me: https://www.paypal.com/paypalme/printyourfix Visit my website for contact form: https://printyourfix.com/ Follow me on Instagram: https://www.instagram.com/printyourfix/ Visit YT channel:…
Drywall cutting tool for Stanley 0-11-911 blades, mounted on 20x20mm square aluminium tubing with pencil mounting. Pencil mount should be glued to the base of cutting tool. M10 nuts- 2 pieces M10 x30mm or longer bolts -2 pieces M6 nuts- 3…
A simple wall mount (bracket) for DeWalt drywall skimming blades. My 32" blade kept getting in the way, so I decided to mount it to a wall for safe keeping. The model referenced a 3D scan of the blade, so the shape, size, and contour…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn hard skills and test out…
MY BEST DRYWALL ANCHOR YET IS DESIGNED TO USE A PHILLIPS HEAD SCREWDRIVER TO INSTALL ALSO HAS A BIT TIP ON IT THAT SNAPS OFF EASY FOR DIFFERENT LENGTH SCREWS TO BE INSERTED AND IS DESIGNED TO HAVE A WIDER OUTER RING TO MAKE FOR A TIGHTER…
A transition piece from indoor PVC electrical conduit to drywall. This allows for cleaner installation when running conduit into drywall - secure with drywall screws.
I install a lot of smoke detectors and those little red anchors they send with them are so soft and you have to tap them in with a hammer and they often will just squish or you'll mark up the wall, also carrying a hammer around is just…
An idea I had and gave a quick try a bit ago. It's very much not a finished product, but I don't feel up for putting a bunch of time into developing it, so maybe someone else can have some fun with it. I cannot be blamed if it breaks when…
I have no design or engineering experience and cannot guarantee the safety of or recommend constructing this project I call building blocks. It is designed for my nieces and nephews so that they could learn hard skills and test out…
Spacers to determine the distance when milling plasterboard. The first positions the milling machine 20 mm from the rail, the second one another 26 mm for the next milling. Two-color version
Adapted the model from boksbox on cults3d so it was just two pieces and fit the drywall (½") in my basement walls without needing the extra inside frame. The clips instead of being glued on are now part of the print which only requires…
A remix of fabian's TP holder design to incorporate LoboCNC's Drywall Nubs system.
This is a drywall bucket scoop to get mud out of a bucket easily. I edited it on tinkercad and sliced it with Kirimoto.
I use this grommet in an unfinished basement with partial drywall walls. Use this if you have access on both sides of a drywall wall Includes fusion360 files as well as STEP I printed with default ASA settings on a Prusa XL. PLA should be…
This is a simple holder for a Dewalt Drywall saw. Prints flat without supports. You may want to add a brim to help with peel up depending on your print settings.
This adapter allows the WEN Drywall Sander [Model DW5062] to easily connect to the Cen-Tec 32mm QuickClick System. I utilized a tight slip-fit that allows the WEN's swivel mechanism to fully function. I've use this extensively while…
gotta dry dishes but counter space is at a premium. so we build vertical. this was an experiment using plasticity. a Skadda version will be made sometime but right now command strips are king. without infill they are strong but i…
Anchor that screws into drywall, with internal thread for 8-32 bolt. Simply drill a ¼" hole in your drywall and turn the anchor in with a Phillip's screwdriver until the end is flush with the drywall. The threads in the center hole accept…
The parts are designed for telescopic rod Güde VT 290 but this rod is a generic chinese tool sold under various different brands so the parts might be compatible with other rods too. Boot is designed for a ball with 19.5mm diameter. Both…
I made this handheld wiping knife to wipe tape behind a drywall taping bazooka but you could use it for anything like spreading or scraping. Plastic knives can be great in the drywall trade but only for wiping tape in my opinion, it could…
This is a fancy sheath for an Irwin jab saw. Made it out of PETG. Fits a 1.55mm blade but should fit most saws. You can print 2 tone colours like I did (use superglue to join together) or you can just print the main body I have included…
Covers a 4 inch diameter hole in ½ drywall. Nice snug fit, but I probably a little too stiff to be easy to remove and reinsert with PLA. If that is your need, you might try reducing the walls to 1 layer above the cover face and printing…
a couple accesories i slapped quickly in CAD. look at the .stl preview (and picture) to understand their uses. thank you for your time. Enjoy!
Spray Gun you buy at Home Depo. Its for doing touch up drywall texture. Can loosen the set screw and rotate the inlet of the gun to face up. Then screw this hopper on. There is a pin that inserts into the inlet opening to allow you to…
This 1-¾" vacuum hose adapter is based on an older (~2010) Ridgid shopvac, and was designed to fit a newer (~2025) Husky drywall sander. It can be used to plug any ~1-¾" hose inside any ~2.1" port. The design is a cylinder with a tapered…
The ES Holder requires two M6 screws (15–20 mm) and two M6 nuts for assembly. At a height of 10 mm , there is a notch indicating where to change the filament color to white for improved laser visibility. The white section should be 2 mm…
I needed a plug to hide some speaker wires and keep my desk clean. I didn't find a model I liked so I made one. This fits Amazon basic 16 gauge standard speaker wire It's designed so that you can drill a hole with a 3/8 inch drillbit and…
Drywall nubs? These auger-style drywall/plasterboard anchors have a little knob on the end that you can either hang skinny things on directly (like lanyards, picture frame wire), or you can use them as anchor points for accessories with…
Honeycomb storage … ceiling? I decided to use HSW to attach some new plant lights to my ceiling (to replace the ones you see in the photo … I'l update that once they're installed). This was a good opportunity to design an updated…
I've seen a variety of methods for printing reinforced drywall anchors, but haven't found one that printed reliably on my printer and did the job. So I've borrowed some ideas from those other places and created my own version in OpenSCAD.…
This is a remix of the great Raspberry Pi Display 2 mount. It extends the mount to work with 0.5 inch drywall and makes room for USB-C power connections on the Raspberry Pi 5 if you aren't using PoE. I also thickened the magnet walls to 1…
Fittings to attach Honeycomb Storage Panels to plasterboard or drywall interior walls, using Ramset Wallmates WM25 plasterboard anchors. The anchors are sufficient to hold the panels, no extra screws are needed. Hollow cover to stash very…
Drywall countersunk screw washer #6 size bugle head Most countersunk washers are a true 40 or 45% bevel, this doesn't match a standard bugle head drywall screw, so I made this. I recommend to print with 3 walls There is a "flatter RARE"…
Do you like rodents ? I do to some extent, however my patience reaches its limits when they start nesting in my walls and eating the insulation. I designed this plugable poison dispenser with quick access is mind in order to restock the…
Drywall Inside Corner Trowel, Hole Repair, View Hole Cover
This model is intended for use with Waxpoetic's Modular Glasses Rack. I printed this with supports on, but I put a support blocker on the hex hole side of the shaft.
Simple design of Drywall hole cover. 2 Versions - 4 Spoke and 6 Spoke. Hole diameter - 85mm. Cover Diameter - 95mm. Spoke hight - 16.5mm (13.5mm drywall thicknes) Printed with White PLA. 3 Walls. 10% Infill.
Made a Basic Headphone holder that can be used with standard 1/4" and 6mm hole drywall anchors. No supports required
I designed this to pass through a standard residential wall. Can be used for an air vent or passing cables. The flanges are 5", and the tube is designed to fit through a 4" diameter hole in the wall.
Due to the installation situation, I converted a double device box into a junction box and needed a cover for it. The cover has a 1 mm high collar around the edge to cover the gap to the wall for protruding boxes. If the collar is not…
I needed a visitation door for some pipes i have behind a drawer in the bathroom. Unfortunately, i could not find anything on the market that would actually slide, so it would not interfere with the drawer cabinet. You can see the…
I printed the threaded section (the part that goes into the wall) from the original file scaled to 100.5% on the X and Y axes for easier installation. You need M3 heated insert, screws and washers
This is a simple tool that helps with drywall ceilings especially when you work alone. You screw in fist plasterboard then slide holder onto one of the screws and then when mounting second plasterboard instead of having to hold it all by…
![Adapter: Cen-Tec QuickClick [32mm/1.25"] -to- WEN Drywall Sander](https://media.printables.com/media/prints/1d550c08-c9b8-4773-bf84-171a1adf028e/images/10333738_6275b468-c3ff-4386-a029-e77fefe0879d_3c34bf82-4099-4ab6-8751-b606d3dbdf97/centec-to-wendrywallsanderadapter-10.jpeg)
