1 / 2
Hilti Drywall Dust Vacuum to Dyson Accessory Adapter
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use Dyson accessories with a Hilti Drywall Dust Vacuum. Useful to pick up flour or diatomaceous earth.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 61
- Wydruki
- 0
- Wyświetlenia
- 545
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
This is an adapter to use Dyson stick vacuum accessories with a Hilti VC 40-U industrial wet/dry vac. This is useful if you need to pick up large quantities of fine dust that would clog a household vacuum
The Hilti vacuum is available for rent at Home Depot but doesn't come with nozzles or accessories
Print time:
- 1 build plate
- ~20 grams of filament
- ~45 minutes on BambuLab X1
BOM:
- No additional hardware required
Materials:
- Use something with decent toughness and layer adhesion
- I'd recommend PLA+, PETG, or a hard TPU
- I used Prusament PETG
Print Settings:
- Defaults should be fine
Assembly
- None required
Change log
- 2023-05-20
- Initial release
Feedback and remixes:
- Post your feedback or link a remix in the comments and I’ll incorporate it on a ~monthly cadence
Credits:
- None