Drywall CD60 profile mount aid (uchwyt do karton-gipsów)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mount that will help you install a dry wall ceiling on your own.
- Ocena
- 5 / 5
- Polubienia
- 149
- Pobrania
- 961
- Wydruki
- 5
- Wyświetlenia
- 3546
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Why?
My buddy showed me those when we were talking about a drywall ceiling I was about to put up in my living room. While many different tools like that exist already I wanted to make my own to practice CAD and add mounting for the “laser shield”
The model is mine and made from scratch, but I can't claim the idea is original, there's plenty of tools like that. I made one to practice and add the laser shield.
Features
You can install the whole CD60 profile framing basically on your own, level everything nicely with the help of a laser and then screw the profiles to the hooks without much hassle (one that tried to do this with two hands know how tricky this work is).
Print settings
- No supports
- Use something else than PLA, PETG is fine
- 0.3 mm layer height
- 0.45 mm wall width
- 15% infill
Bill Of Materials
For one mount you'll need:
| Item | Qty | Description |
|---|---|---|
| M8 screw 30-40mm | 2 | See drawing bellow for details on the length |
| M8 nuts | 4 | |
| gk_mount_base | 1 | Printed |
| gk_mount_nut | 2 | Printed |
You can use almost any M8 screw that sticks out about 18mm from the base of the nut into the base part. If using a cap head that can go into the nut a 30mm screw is great. If the screw has a head that won't fit inside then a 40mm is good.
If you'd like to use the “laser shield” you need a few additional parts listed below.
You might want to print 5 of those in total and have only 2 with the shield.
| Item | Qty | Description |
|---|---|---|
| Heat inserts M3 x D4.6 x L4.0 | 2-4 | 2 pcs for each side, one side might be enough |
| DIN 912 M3 x 8mm | 2-4 | Same deal as above, 2 might be enough |
| gk_mount_plate | 1 | Printed, pause before the last layer stars to switch to a different color |