Chamber heater airflow heating System
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chamber heating system with airflow desgined for any 3d printer picture shows only example feel free to add ur touch
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 291
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Open Community License v1.1
Chamber heating system with airflow desgined for any 3d printer
use my meanwell 350watt psu case in combination
Material list:
PTC heater: i use 2x150watt =300watt
mosfet:
350watt Power supply:
chamber/ ptc thermistor:
75mm pipes:
thermal fuse i recommend 100-120degree:
Use your favourite print settings i only recommend to print the parts near the ptc heater with abs the other are printed with PETG.
v3 update 31.03.26
bether cable management ptc case v3
v2 update: 23.02.2026
smaller connector pipe convert to from 60mm to 75mm pipe; also a ring seal; bether tolerances for 75mm pipe
changes on ptc cover smaller cover ; wire entrance and infill changes
top intake bether tolerances; added a knob and also a ring seal; bether tolerances for 75mm pipe
This is a prototype; further improvements may follow. If you would like to improve anything, please let me know. CAD files are included; remixes are welcome.