Flexible rulers for tabletop gaming
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flexible rulers with inch or feet measurements
- Ocena
- 4 / 5
- Polubienia
- 22
- Pobrania
- 161
- Wydruki
- 1
- Wyświetlenia
- 456
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
I really love this idea, found some designs, but none to my liking so I have made this one.
Edit 28.2.2026 - added double sided version
Printing
3walls, 4 top and bottom layers, 15% infill, tested with PLA, no supports
Colour change after 8mm (layer 41 with 0.2 layer height)
For double sided version make first layer change after 0.6mm(layer 4 with 0.2 layer height) and after 7.4mm (layer 38)
It's really important to have flow, pressure advance and your printer dialed in. You can expect a little bonding but everything should move fairly easy after few turns. Try smaller piece for the start.
If you still have troubles with printing it, you can add -0.05 in xy hole and contour compensation in orca slicer(all slicers should have similar function)
---------------------
Do you like what we do ? Give us download and like. We burn a lot of plastic in prototypes so you don't have too. Thx :)