Flexible rulers for tabletop gaming
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flexible rulers with inch or feet measurements
- Rating
- 4 / 5
- Likes
- 22
- Downloads
- 161
- Makes
- 1
- Views
- 456
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Attribution
I really love this idea, found some designs, but none to my liking so I have made this one.
Edit 28.2.2026 - added double sided version
Printing
3walls, 4 top and bottom layers, 15% infill, tested with PLA, no supports
Colour change after 8mm (layer 41 with 0.2 layer height)
For double sided version make first layer change after 0.6mm(layer 4 with 0.2 layer height) and after 7.4mm (layer 38)
It's really important to have flow, pressure advance and your printer dialed in. You can expect a little bonding but everything should move fairly easy after few turns. Try smaller piece for the start.
If you still have troubles with printing it, you can add -0.05 in xy hole and contour compensation in orca slicer(all slicers should have similar function)
---------------------
Do you like what we do ? Give us download and like. We burn a lot of plastic in prototypes so you don't have too. Thx :)