Polydryer Snapdryer MaxVents Desicant holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Robinson desiccant holder making it stronger and adding vents on all sides. This is the one I use in all boxes.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 59
- Wydruki
- 2
- Wyświetlenia
- 318
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
V4 mod with more narrow toe uploaded as a option for download. I did a test print and V4 works well with the newer boxes.
Edit: The most recent set of boxes I received (4 of them) all have a bit narrower slot to place the “toe” into or maybe my printer a touch more PETG than previous prints.
Version 3 of the remix. I made the outer body stronger, added interior blocking up the slot grooves , placed vents on all sides, tilted the bottom “toe” portion 5 degrees so the container doesn't tilt backwards in the box, and added to the “toe” area so it grips the dryer slots much much better. This is P-I-P without need for support or brim, just make sure you have good first layers. Go slow for the first few layers. I used clear PETG to be able to see the desiccant color change and it shows through great. If needed, I also uploaded a extra file that has a cutaway portion if you choose/need to use a brim. The cutaway portion prevents the brim being added into the vent space by slicers.
These are the ones I use in all my boxes and they dry in my A-frame dryer model without needing to remove the desiccant making a mess.
