articulated rockto-pus [octopus toy]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
just a octopus toy lol read description for important settings and other important notes that will be needed for print
- Ocena
- 4,5 / 5
- Polubienia
- 13
- Pobrania
- 328
- Wydruki
- 2
- Wyświetlenia
- 768
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An hybrid of Dwayne “The rock” johnson and a articulated octopus
1:NOTE Don't make it too small or the legs might have some trouble moving
2:NOTE your slicer program might say this needs supports but it really does not need supports so try to bypass it I printed it without supports and had no problems
Before u ask yes I did some test prints of this model before publishing it here
history/memory
was created on 2/10/2026 then edited on 2/11/2026
and then uploaded on 2/12/2026
Print settings
1 supports: No supports or brims required - good
2filament type: you can use any kind of filament - yes (I use PLA)
3 size: you can use any size but not too small
4 Print time: 1hour and 20secconds
it's bigger than the model looks