Vetus raw water strainer bracket for spacing or repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A bracket to move the raw water strainer further off a surface (scale in z dimension to desired size).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 19
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
The Vetus raw water strainers are secured by two screws on the built in bracket. The screws are often difficult to access and sometimes the bracket is damaged. This part can be used with epoxy to repair the bracket. Or you can use it to extend the position of the raw water strainer further off of the mounting surface. The default depth of the bracket (z-direction when printed flat) is 4mm but you can scale the print in your slicer to the desired depth so the bracket can easily be sized to meet your needs.
Bracket size is: 98mm x 43mm x 4mm