Under Table/Desk Storage Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A storage tray for mounting under your table or desk. Optional holes for mounting with screws.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 262
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Under Desk/Table Storage Tray
I designed this under desk/table storage tray to store the small scale I use for measuring the weight of my spools, but you could use it for anything as long as it will fit. The outer corners are rounded with a 1.0 mm radius for safety. There are 4 mm diameter holes for optional mounting with self-tapping wood screws. However, I mounted mine with 3M Command Strips, and they are more than adequate. The design is strong and durable with a honeycomb pattern for weight and material reduction.
You can either print the model flat on the surface with the honeycomb pattern, or you can rotate it 90° to print it vertically on the flat back surface. I recommend the former with tree supports enabled for the mounting tabs that overhang at the top. I got great results with that orientation on my Creality K1C.
Photos:
Recommended Print Settings:
Setting | Value |
|---|---|
Nozzle | 0.4 mm |
Layer Height | 0.2 mm |
Extra Perimeters Overhangs | True |
Wall Loops | 3 |
Top/Bottom Layers | 3 |
Infill Density | 15% |
Infill Pattern | Gyroid |
Support | True |
Support Type | Tree (auto) |
Remove Small Overhangs | True |
Sharing License:
This model is shared under the open-source CC-BY license. I am a staunch advocate for open-source and the freedom / community it provides. You can use my models however you like. All I ask is for proper attribution.
Thank you!