Nevermore V5 Duo Cable Exit Plug / Strain Relief
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Friction-fit ASA plug for the Nevermore V5 Duo cable exit. Provides a clean finish and protects fan wiring.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is a small functional part designed to fit the cable exit hole of the Nevermore V5 Duo filter. It is a friction-fit design that snaps into place without the need for fasteners or glue.
If a more permanent bond is desired or if tolerances vary, you can use a drop of acetone on the inside mating surfaces (since it's printed in ASA) or a small drop of super glue to secure it.
The part was designed to protect the fan wires from the edges of the housing and to improve the overall look of the assembly under the printer bed.
Technical Details:
Material: Printed in ASA to withstand the high temperatures inside the Voron 2.4 chamber.
Compatibility: Designed for the Nevermore V5 Duo housing and 5015 fan wiring.
Wiring: In the photos, two 5015 fans are wired in parallel (24V) for connection to a mainboard like the LDO Leviathan v1.3.
Print Settings:
Material: ASA or ABS.
Supports: No.
Layer Height: 0.2mm.
Note: Technical description and translation assisted by AI.