Easy & fast shrinkage test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to mesure test to calculate the shrinkage of different filaments.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 29
- Wydruki
- 1
- Wyświetlenia
- 86
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to create a shrinkage test to reduce mersuring errors. I included a lipp where you can rest your calipers on to be able to mesure from the top. This way it doesent matter if your pressure advance is off and your corners are bulky. I also wanted it to print it quickly and be stiff with as little filament as possible.
In Orca Slicer set your filament shrinkage to 100%.
Print this Printing test.
VERY IMPORTANT . Wait until the part cooled down completely. It will keep shrinking until it is cooled down.
Messure as shown in the picture.
Put the mesured value in the filament shrinkage location (for example 99,73%)
Done