Easy & fast shrinkage test
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to mesure test to calculate the shrinkage of different filaments.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 29
- Makes
- 1
- Views
- 86
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to create a shrinkage test to reduce mersuring errors. I included a lipp where you can rest your calipers on to be able to mesure from the top. This way it doesent matter if your pressure advance is off and your corners are bulky. I also wanted it to print it quickly and be stiff with as little filament as possible.
In Orca Slicer set your filament shrinkage to 100%.
Print this Printing test.
VERY IMPORTANT . Wait until the part cooled down completely. It will keep shrinking until it is cooled down.
Messure as shown in the picture.
Put the mesured value in the filament shrinkage location (for example 99,73%)
Done