Articulated Hand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully articulated print-in-place hand with smooth-moving fingers—perfect as a desk prop, fidget, or display piece.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 173
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
FlexiGrip is a fully articulated 3D printed hand designed for smooth finger movement straight off the build plate. Each finger is segmented with integrated joints that allow natural bending motion without complicated assembly.
This model works great as:
A desk fidget
A Halloween prop
A drawing reference
A robotics-inspired display piece
A conversation starter for your workspace
The joints are tuned for reliable movement while maintaining structural strength. Depending on your printer tolerances, you may need to gently flex the joints after printing to fully free movement.
Print Settings (Recommended)
Layer height: 0.2mm
Infill: 10–15%
Walls: 3 perimeters
Supports: Not required (if oriented flat)
Material: PLA recommended
If your printer runs tight tolerances, slightly increasing horizontal expansion compensation may improve articulation.
Scale up or down to adjust stiffness — larger prints tend to articulate more smoothly.