1 / 3
Nerf Talon Magazine Clamp - Reinforced and Reversed — zdjęcie 1
1 / 3

Nerf Talon Magazine Clamp - Reinforced and Reversed

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of Hing Yip Industries' talon magazine clamp, reinforced and one side is rotated 180 degrees.

Ocena
5 / 5
Polubienia
11
Pobrania
32
Wydruki
2
Wyświetlenia
131
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Public Domain

Aside from reinforcing the clamp, the magazines now point in opposite directions. This is to allow for reload by spinning the pair, and based on how you setup your pair the spare magazine will always be on the left or right side (your choice!). This is especially useful for bullpups, to keep the spare mag away from your dominant arm. 

Generic print suggestion: 3 walls, 20% infill, .015mm layer height.

Additional material needed per clamp: 1x M3 headset, 1x M3x8 or 10mm screw. 

Additional material recommended: electrical tape to shim for fit. 

Tagi