Fender for Rockshox Bluto - 4 Piece
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed from the fender design created by ChPech. I modified the design to print on a shorter printer. It prints in 4…
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 736
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed from the fender design created by ChPech.
I modified the design to print on a shorter printer. It prints in 4 pieces rather than 2. I added an extended interface to make it easy to glue the parts together. I just used super glue. After printing, drilling, and mounting, I went back and added holes to the STL for zip ties once I knew where they should go.
I printed these in PLA, and it looks like it should hold up fine for awhile. Obviously PETG would be better for outdoors and durability, but use what you have.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
No
Filament: Overture PLA Black
Notes:
Ran at 0.3 layer height to print faster and ran fast (100mm/s). Worked just fine. Definitely print with a nice wide brim to keep it stuck down. No supports needed.
Category: Sport & Outdoors