Shelf-Integrated IKEA STARKVIND Air Purifier Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Turn Your 3D Printer Rack Into a Direct Filtration System
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 377
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
Tired of letting fumes build up around your printers?
This project lets you flush-mount your IKEA STARKVIND air purifier directly into a shelf, transforming your 3D printer rack into an efficient, compact air filtration system.
Instead of filtering room air randomly, this setup pulls air directly from inside your printer shelf, capturing ultrafine particles and fumes right where they are generated.
Clean, simple, and professional.
🚀 What This Does
Mounts the IKEA STAKVIND directly into a shelf/rack
Pulls air from the enclosed or non enclosed shelf space behind it
Keeps the control button accessible from the front
Creates a flush, factory-like installation
No external brackets or hanging mounts
Perfect for:
Multi-printer shelves
Enclosed racks
Workshop filtration upgrades
Compact printing rooms
🧩 Modular Print Bed Friendly Design
The fixation array is available in three versions:
🟢 Full version – for large print beds
🟡 Half version – for medium printers
🔵 Quarter version – for smaller print beds
Print and assemble the version that fits your machine.
🛠 Installation Guide
Place the printed frame on your shelf surface.
Trace the inner square opening.
Mark the screw holes.
Remove the frame.
Cut the square opening in the shelf.
Reinstall the frame.
Insert the purifier — it fits perfectly.
Secure with M3 screws.
The purifier will sit flush with the shelf surface, with the control button facing forward.
🔩 Hardware
M3 screws
M3 square nuts (5.4 mm × 5.4 mm × 1.8 mm)
Integrated square nut traps in the design
Everything locks in cleanly and securely.
🧪 Why This Is Interesting
When mounted this way, the purifier pulls:
Ultrafine particles (UFPs)
ABS / ASA / Nylon fumes
General print chamber emissions
Instead of cleaning the entire room inefficiently, it filters at the source.
🧱 Recommended Print Settings
Material: PETG or ABS/ASA recommended (PLA possible but less heat resistant)
3–4 perimeters
20–30% infill
No supports required