BambuLab P1S/X1C riser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Minimal riser for Bambu Lab P1S/X1C, and probably P2S as well. Intended for cable routing
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 207
- Wydruki
- 0
- Wyświetlenia
- 911
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I just got the Biqu Panda Breath chamber heater and needed a way to route the power cable out the back. Biqu provide a printable riser, but it is much too tall for my liking. I wanted a minimal riser, just tall enough to fit a cable, and with no intricate LED strip geometry.
Split into 8 parts, able to be printed all on one plate.
Available without cable hole as well (it's the same corner piece twice).
Print settings
Print in heat resistant material, PETG or better.
0.2mm layer height, standard settings.
I use grid infill as it prints fast and provides support in the only direction needed.