1 / 2
Panel Clip Spacers for Fan Intake on Corvus PC Case — zdjęcie 1
1 / 2

Panel Clip Spacers for Fan Intake on Corvus PC Case

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Spacers to allow for fan air intake without cutting the panel.

Ocena
0 / 5
Polubienia
6
Pobrania
9
Wydruki
0
Wyświetlenia
212
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
GNU General Public License v3.0

Simple spacers to use with original panel clips to allow for fan air intake, without cutting the panel or limiting access to front extrusions. Creates a 10mm gap between the frame and the panel.

  • Use M3x18 or 20mm SHCS with original panel clips and these spacers.

  • Add 1mm foam tape on the spacers where the panel will lay to keep the panel from scratching/vibrating.

You can use the step files to adjust the size to make a larger or smaller gap.

I use these with the 120/140mm fan mount remix: https://www.printables.com/model/1434738-vpc-120140mm-front-fan-mounts

In the process of designing a magnetic fan intake filter that will sit between the fan mounts and these spacers/panel. I only have front intake fans so the filter will be sized for the front.

Tagi