Panel Clip Spacers for Fan Intake on Corvus PC Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spacers to allow for fan air intake without cutting the panel.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 9
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- GNU General Public License v3.0
Simple spacers to use with original panel clips to allow for fan air intake, without cutting the panel or limiting access to front extrusions. Creates a 10mm gap between the frame and the panel.
Use M3x18 or 20mm SHCS with original panel clips and these spacers.
Add 1mm foam tape on the spacers where the panel will lay to keep the panel from scratching/vibrating.
You can use the step files to adjust the size to make a larger or smaller gap.
I use these with the 120/140mm fan mount remix: https://www.printables.com/model/1434738-vpc-120140mm-front-fan-mounts
In the process of designing a magnetic fan intake filter that will sit between the fan mounts and these spacers/panel. I only have front intake fans so the filter will be sized for the front.
