Vapvana Ace Glass Bowl Funnel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A collar funnel designed for the Vapvana Ace ball vape glass bowl.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
I got tired of trying to use the SQP to put material into the Vapvana Ace glass bowl. A normal funnel is also not desirable since the spout rests inside the bowl. Instead I devised a collar funnel that fits on the outside diameter of the bowl and rests flush with the top of the bowl.
Material
I used some random PLA to print it. The print isn't really exposed to heat or anything, so PLA should be more than sufficient for this funnel.
Layer Height
I printed with 0.2mm layers with a 0.4mm nozzle.
Supports/Overhang
No supports are needed for this. The angle of the funnel should be printable, but you may wish to print outside perimeters first if the innermost layer lines curl up or warp during printing.
Final Notes
Feel free to remix this or adapt the model. I better not see this crap on Etsy or Cults or whatever!
If you feel so inclined to support my myriad of basement hobbies feel free to donate!