1 / 4
Gürtel Köcher für /belt quiver for Knipex Cobra XS 87-100 — zdjęcie 1
1 / 4

Gürtel Köcher für /belt quiver for Knipex Cobra XS 87-100

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Wstępna wycena dla PETG

1,66 € – 2,03 € netto (bez VAT)

Dla pliku: Mini-Knipex_holder_0.3mm_PETG_MK3S_1h40m.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,85 € netto (środek widełek).

Masa podana przez autora
29 g
Czas druku podany przez autora
1,66 godz.
Materiał u źródła
PET
Materiał wyceny
PETG
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

[Eng] Small Simple gadet for my little Cobra ;) [Deu] Kleines Helferlein für meine kleine Cobra ;)

Ocena
5 / 5
Polubienia
15
Pobrania
139
Wydruki
1
Wyświetlenia
1618
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial

[Deu]

#Info

Brauchte für meine Knipex Cobra XS eine Halterung/Aufbewahrung, weil sie mit ihrer scharfen Kante vorne schnell Löcher in meine Arbeitshosen zaubert. Nutze das ganze jetzt seit über einem Monat und habe mich daran gewöhnt.

Besitzte nur Latzhosen als Arbeitshose daher kann ich nicht sagen ob das Ganze auch als Gürtelversion gut funktioniert. Wenn also jemand dieses beabsichtigt, bitte ein Feedback dazu. Eventuell muss an dem Clip was angepasst werden.

 

#Das Model

Angepasst für meine Bedürfnisse hab ich mich für eine offene Variante entschieden die für meine Latzhose passt. Flexibel in der Benutzung ohne festen Sitz und Arritierung. Unten sind Löcher zum einen für die Druchlüftung bei Feuchtigkeit und zur Reinigung.

Wandstärke Umlaufend: 2mm

#Der Druck

Gedruckt in PETG, Layerpreset: 0,3mm Draft, Druckzeit: 1h40m Support: Ja

Viel spass beim nachdrucken und benutzen :)

________

[Eng] (Translate on Google)

#Info

I needed a holder/storage for my Knipex Cobra XS, because its sharp edge at the front quickly conjures up holes in my work trousers. I've been using it for over a month now and got used to it.

I only owned dungarees as work trousers, so I can't say whether the whole thing works well as a belt version. So if anyone intends to do this, please give feedback on it. Maybe something needs to be adjusted on the clip.

#The model

Adapted to my needs, I decided on an open version that fits my dungarees. Flexible in use without a tight fit and locking. Below there are holes for ventilation in case of moisture and for cleaning.

Wall thickness all around: 2mm

(Pictures in German Version on top)

#The Print

Printed on PETG, Preset: 0,3mm Draft, Printtime: 1h40m, Support: Yes

Happy printing and using :)

 

Tagi