Geeetech i3 pro W fan + 3dtouch mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed a simple fan mount with including 3d touch on the side. Made my own and does the job well. Make sure to…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 392
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
I needed a simple fan mount with including 3d touch on the side. Made my own and does the job well. Make sure to adjust the nozzle - probe distance x/y in marlin. Mine is
" #define X_PROBE_OFFSET_FROM_EXTRUDER 41 "
" #define Y_PROBE_OFFSET_FROM_EXTRUDER -46 "
Yours will probable around this.
The right hole is to mount the fan to the carriage. The middle hole is for a short bolt to mount to the carriage. The left hole is for the fan + mount only. All made for m3 size.
Print Settings
Printer:
Geeetech i3 pro W
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
Geeetech PLA
black
Notes:
Printed at 50 mm/s
Bed - 60 °C
Heater - 205 °C
How I Designed This
Designed in FreeCAD.
Category: 3D Printer Accessories