Geeetech i3 pro W fan + 3dtouch mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I needed a simple fan mount with including 3d touch on the side. Made my own and does the job well. Make sure to…
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 38
- Makes
- 0
- Views
- 393
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
I needed a simple fan mount with including 3d touch on the side. Made my own and does the job well. Make sure to adjust the nozzle - probe distance x/y in marlin. Mine is
" #define X_PROBE_OFFSET_FROM_EXTRUDER 41 "
" #define Y_PROBE_OFFSET_FROM_EXTRUDER -46 "
Yours will probable around this.
The right hole is to mount the fan to the carriage. The middle hole is for a short bolt to mount to the carriage. The left hole is for the fan + mount only. All made for m3 size.
Print Settings
Printer:
Geeetech i3 pro W
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
20
Filament:
Geeetech PLA
black
Notes:
Printed at 50 mm/s
Bed - 60 °C
Heater - 205 °C
How I Designed This
Designed in FreeCAD.
Category: 3D Printer Accessories