Concrete Garden Sun Orb Mould
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A decorative concrete garden orb mould.
- Ocena
- 5 / 5
- Polubienia
- 73
- Pobrania
- 114
- Wydruki
- 1
- Wyświetlenia
- 1103
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Create your own home garden sun orb with this easy mould design. It features two identical bottom halves and two identical top halves.
The pictures shown are moulded using a fine, fast drying mortar with a sandstone oxide.
The finished orb is 220mm x 220mm x 220mm H.
The mould bodies have been printed in CF-PLA to maintain a stiffer shape. However normal PLA should be ok. Keep in mind that there is approximately 10kg of mortar, 2Lt of water and 500g of oxide poured into the mould.
CF-PETG would a better choice if you intend on doing several runs.
I have done 8 garden orbs from this one CF-PLA mould, however it is starting to wear and fatigue.
The two mould hemispheres are bolted together using:
12x M6 x 20mm bolts, washers and nuts.
6x M6 x 20mm Countersunk bolts.