Concrete Garden Sun Orb Mould
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A decorative concrete garden orb mould.
- Rating
- 5 / 5
- Likes
- 73
- Downloads
- 116
- Makes
- 1
- Views
- 1,110
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Create your own home garden sun orb with this easy mould design. It features two identical bottom halves and two identical top halves.
The pictures shown are moulded using a fine, fast drying mortar with a sandstone oxide.
The finished orb is 220mm x 220mm x 220mm H.
The mould bodies have been printed in CF-PLA to maintain a stiffer shape. However normal PLA should be ok. Keep in mind that there is approximately 10kg of mortar, 2Lt of water and 500g of oxide poured into the mould.
CF-PETG would a better choice if you intend on doing several runs.
I have done 8 garden orbs from this one CF-PLA mould, however it is starting to wear and fatigue.
The two mould hemispheres are bolted together using:
12x M6 x 20mm bolts, washers and nuts.
6x M6 x 20mm Countersunk bolts.