Paper Plane Ornament
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flying high above the paper clouds.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Attribution — Noncommercial
An easily scalable paper plane ornament that can fit wherever you might find a spot for it.
Assembled with 3 parts. You may need to apply a small amount of force to clip the plane into the vertical stand. It should hold in place with just friction but applying a small amount of glue can help if you don't mind it being permanently fixed.
Print Settings:
Printer: Bambu Lab P2S
Material: Esun PLA+
Printing Temperature: 195 °𝐶
Build Plate Temperature: 55 °𝐶
Layer height: 0.2 mm
Infill Density: 10%
Infill Pattern: Gyroid
Initial Speed: 55 mm/s
Outer Wall Speed: 60 mm/s
Inner Wall Speed: 150 mm/s
Infill Speed: 200 mm/s
Supports: None
Orientation: Lying flat
Find more designs on my MakerWorld page: https://makerworld.com/en/@Sentinel_Ideas