1 / 1
Makita 18V Honeycomb Storage Wall Holder (With STEP and Fusion 360 files) — zdjęcie 1

Makita 18V Honeycomb Storage Wall Holder (With STEP and Fusion 360 files)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Attach your Makita 18V battery to your HSW, wow!!!!!

Ocena
0 / 5
Polubienia
8
Pobrania
16
Wydruki
0
Wyświetlenia
138
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This utilises M3 screws and M3 nut inserts to secure to your honeycomb storage wall (HSW, because I'm lazy). 

I used M3x10 screws. You will need two M3 nut inserts per battery. I use a dab of B-7000 (phone adhesive) to secure the nuts to the inserts so that once the inserts are in the HSW, they won't fall out, forcing you to take the insert off (which can be easy, actually, I insert an M3 screw in the insert, and use the pry side of a hammer to take the insert out).

Place the inserts as follows

Then, just screw with two M3x10 screws like below

Tagi