1 / 1
Makita 18V Honeycomb Storage Wall Holder (With STEP and Fusion 360 files)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Attach your Makita 18V battery to your HSW, wow!!!!!
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 16
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial
This utilises M3 screws and M3 nut inserts to secure to your honeycomb storage wall (HSW, because I'm lazy).
I used M3x10 screws. You will need two M3 nut inserts per battery. I use a dab of B-7000 (phone adhesive) to secure the nuts to the inserts so that once the inserts are in the HSW, they won't fall out, forcing you to take the insert off (which can be easy, actually, I insert an M3 screw in the insert, and use the pry side of a hammer to take the insert out).
Place the inserts as follows

Then, just screw with two M3x10 screws like below
