Router Small Circle Jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Update 30Dec19: I made a new version with much improved lettering on both sides, 1/4" pivot pin holes, and size offset…
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 184
- Wydruki
- 0
- Wyświetlenia
- 1512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
Update 30Dec19:
I made a new version with much improved lettering on both sides, 1/4" pivot pin holes, and size offset for 1/2" bit.
Original Post:
I had a router jig that bolted to the base of the router that I hated using because the router had to spin with the jig, which tangles up the vacuum hose. I made this one to accept a 3/4" template bushing in the center so the router base can move independently. The pin holes are 1/8" because I usually use a drill bit as a pivot. Sizes are offset to accommodate 1/4" router bit.
Print instructions
Category: Tools Print Settings
Printer Brand: Prusa
Printer: I3 MK3S or Mini
Rafts: No
Supports: No
Resolution: .2 mm
Infill: 30% Hex
Filament: Any