Foil NutGuard 3D & Isolation pieces Fencing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mechanical Lock to secure the nuts and parts to isolate the circuit on your foil.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Indoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Designs
I prepared 3 Designs for you:
A) Spare Parts + Nut Holder: 5 Pieces - Isolation Top + Bottom + Base + Nuts
This design lets you carry all "original" parts with you in case you are not allowed to use this modification on a tournament. So it is easy to always go back and not loose any parts on the way.
B) Simple Nut holder: 4 Pieces - Isolation + Base + Nuts
This design is a little stronger than a) and does not need to hold the extra bottom isolator.
C) Threaded "NoNut" Holder: 2 Pieces - Isolation + Base
This design comes with printed threads. So no nuts required at all.
D) Isolation Parts
Simple Isolation - Dimensions just like the original ones.
The spare Part Holder does have a small opening so that the bottom insulation can be easily removed.
Material Choice:
I would highly recommend using Hard TPU or PETG for the designs.
If you use TPU you might not need the tensioning washers.
Thx to Piet Wauters for his design that inspired me to create such an improovement of my foil too!
https://www.printables.com/model/1117413
