Microphone Boom Arm GoPro Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model converts a cheap microphone boom arm into a positionable GoPro camera mount.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 722
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This model converts a cheap microphone boom arm into a positionable GoPro camera mount. Utilizes stock GoPro mounting hardware, and fits all standard GoPro mounts.
V1 Pictured. V2 includes improvements to design to reduce filament usage and is more aesthetically pleasing.
For best results rotate 90-degrees onto the side and use supports.
Attach the printed mount to the microphone angle adjustment piece that comes with the boom arm. (See mount-instructions.png)
This mount has been tested with the following microphone boom arms:
- Aokeo AK-35 Microphone Stand - https://amzn.to/3iVrYMn
- InnoGear Microphone Stand - https://amzn.to/36Qm2BN
- GoPro Richer-R Rotary Extension Arm Kit - https://amzn.to/3DwhfRQ
*Note: This post contains Amazon Affiliate links that support The Makers Workbench via a small commission from any sales they help generate.
Design File Included: .stl .f3d, .ipt, step, .skp and obj files.
Follow The Makers Workbench on:
I have only tested this model using the default 0.35mm FAST preset in Prusa Slic3r 2.3.3 with the following amendments made.
Print Settings
- 6-perimeters
- 4-top layers
- 4-bottom layers
- 20% infill
- Cubic Infill
- Monotonic Top and Bottom Pattern
- Detect Bridging Perimeters - True
Support Settings
- Contact Z Distance - 0.3mm
- Pattern Spacing - 3mm
- Pattern Angle - 45-degrees
- Interface Layers - 4
- Interface Pattern Spacing - 0.3mm
PLA Used: Polymaker PLA - https://amzn.to/35D0mbS