Brio Train station 33578 battery cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement for Brio Train station model 33578 (older and newer model compatible)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 55
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Little story about this model: I bought broken Brio Train station toy second hand. The battery cover was missing and it looks like someone was opened the battery cover without screwdriver, so it was totally messed up. Luckily the hingepin was in original place (if yours is missing the size is: diameter 1.5mm and it is 45mm long).
If you like to have working circuit you need 6pcs battery contacts with the printed 3D-model. Contacs what I used is positive (+) AA contacs with soldering plate, measuremets: height 10mm, width 8mm, the soldering plate is 2.8mm width. I soldered them together when placed and for safety reasons I melted plastic over the plates, I think you can use glue (like E6000) too if you don't want to "ruin" the model (the screw will keep little hands off the contacts anyway).
When placing the part to station please check the clock side's contacts (one of mine was very bend and the circuit wasn't working because it, it was quick fix).
I printed this with supports only in the screw place, I think you can print it without the supports too. Please rotate the model flat side on the bed. The screw cover part is separate model, it snap in place nicely (please use little bit of glue for safety). I used PETG, infill 100%, 0.15mm Quality and speed dropped to 65%.