Core One Top FIlament Guide -- REMIXED using 2-deep 6mm by 2mm magnets (28 total)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the two magnetic parts to use 2-deep 6mm by 2mm round magnets (28 total)
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 23
- Wydruki
- 1
- Wyświetlenia
- 279
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Just like the magnetic parts on the original, but using round magnets instead of the original bar magnets. The cover isn't changed so it isn't part of the remix. Still need that part from the original.
From the remix description:
Changed the magnetic parts to use 2-deep 6mm diameter by 2mm (nominally 1.75mm) thick round magnets. 28 magnets used in total.
The round magnets are a little smaller than the bar magnets on the original so they're stacked 2 deep for extra magnetism. Stacking magnets makes them more magnetical.
Magnets are press fit. Will need a flat tool to help get them forced in. Possible to do by hand, but a vice or an arbor press would make it much easier.
Printed on a core one with PETG, default 15% infill, walls etc, works fine.