Bosch Kitchen Fan Cover model: FSF 350 E
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The plastic cover for my kitchen fan broke and I couldn't find any retailer that sold spares, so I designed a new one.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 195
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- GNU General Public License v2.0
The plastic cover for my kitchen fan broke and I couldn't find any retailer that sold spares, so I designed a new one.
This design prints in four parts, and is then held together by 4xM3x18 screws and 4xM3n nuts. Longer screws work too, they will just protrude a bit more but that is not visible anyway. There are also tiny slots for cable ties for extra stability, but I ended up not using those.
Printer settings:
White basic PLA (shouldn't get too hot there anyway, but PET might be a better option for a bit more heat resistance.)
0.20mm layer hight and a 15% infill.
Some supports needed for the protruding “flaps” and I also placed some in the cavities to ensure they don't sack down too much.
Make sure you print one of each corner!