Brio Rail Connector Storage Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact stackable storage box for 5 Brio rail connectors.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 32
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple storage solution designed to keep your Brio rail connectors organized. The box is designed to hold up to 5 connectors in a vertical stack.
Note: Work in Progress Please be aware that this model is currently a work in progress. I am still refining the locking mechanism. Currently, the latch may require a little bit of heat (e.g., from a lighter or hairdryer) to be bent into the final shape. However, I’ve found that it can open a bit too easily on its own.
Current Recommendation: For a secure closure, I recommend using a rubber band around the box to prevent the connectors from falling out. I am planning to design a dedicated version optimized for rubber band fastening in the future.
Available Versions:
Standard: A tight fit for the connectors.
Wide: Features slightly more clearance to ensure the connectors slide in and out smoothly without getting stuck.
Print Settings:
Material: PLA or PETG
Supports: Not required (depending on your printer's bridging capabilities)