Cerbo GX and Touch 50 Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a housing to mimic the look of the Victron equipment to house the Cerbo GX with the Touch 50
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 55
- Wydruki
- 0
- Wyświetlenia
- 316
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Printed this on a Creality K2 Pro with Creality Hyper PLA in Black, Blue and Orange.
I used the default settings for the filament and print settings, just removing the brim option.
The model is designed to take a Cerbo GX on the inside and a GX Touch 50 mounted on the front.
Extra components:
4x M3 3x4.2 nut inserts on the top to attach the Touch 50 and its mounting plates.
7x M4 4x5 nut inserts on the base plate posts to attach the cover.
5x M4 4x5 nut inserts in the bottom cover to attach through the base plate.
Super glue to attach the orange strip to the top cover.
Other instructions:
The Corners are purely intended to match the look of the other Victron kit in my setup, and I just used the soldering iron to melt them to the covers.
Feel free to sponsor me some filament or buy me a coffee :) paypal.me/dkpeall