Screw-Mounted Cable Holders | 4 Sizes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sturdy cable management clips mounted with M3 screws. Includes 4 sizes. Prints flat and requires no supports.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 295
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
BOM: Printed with ROSA3D High Speed PLA Gray
Tired of double-sided tape peeling off and dropping your cables? These screw-mounted cable holders provide a permanent, secure solution for cable management under desks, behind TVs, or along baseboards.
Key Features:
Secure Mounting: Designed with a countersunk hole for a standard M3 screw (wood screw or machine screw). Once mounted, it won't fall off.
4 Different Sizes: The set includes four distinct sizes to accommodate anything from a single USB cable to thick power cords or bundles of wires.
Easy Wire Insertion: The design allows you to easily slide cables in and out without unscrewing the holder.
Printing Instructions:
Orientation: Print flat on the bed (laying on its side). This ensures the plastic layers follow the curve of the clip, making it incredibly strong and flexible when inserting cables.
Supports: NONE. Designed to print completely support-free.
Material: PETG or ABS is highly recommended for flexibility and strength, though PLA will work for static installations.
Infill: 100% (or just increase wall perimeters to make it solid).