Snap-On Kitchen Rail Hooks (10mm Reling)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snap-on kitchen rail hooks for 10mm reling. Secure fit so they won’t fall off. Easy to print and use.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
These snap-on kitchen rail hooks are designed for a 10mm kitchen reling rod.
Unlike standard S-hooks, they clip securely onto the rail and cannot fall off accidentally.
Perfect for hanging kitchen utensils, mugs, towels, or tools.
The model is optimized for easy 3D printing without supports and works well with PLA, PETG, or ABS.
Feel free to remix or adapt the design to your own rail diameter. If you need a version for a different diameter, let me know and I can adjust the model for you.
Print Settings
Material: PETG
Layer height: 0.2 mm
Perimeters/Walls: 3
Infill: 15%
Supports: No
Print orientation: Print as provided
Usage & Durability Notes
These hooks were printed in PETG, which is recommended for kitchen use due to better heat and moisture resistance.
They are suitable for hanging lightweight to medium-weight kitchen utensils, towels, or mugs.
For heavy items or long-term use near heat sources (e.g. stove), PETG or ABS is preferred over PLA.
For higher load capacity, increase wall count or infill.