360 degree HLK-LD2450 24GHz Radar Module Bracket for 1" (25.4mm) Square Tube
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mounts 4x HLK-LD2450 radar boards around a 1" square tube with C-channel grooves, FOV chamfers, and structural fillets.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
A parametric mounting bracket for four HLK-LD2450 24GHz radar modules on a 1" (25.4mm) square aluminium tube. Designed for outdoor radar sensor arrays.
Features:
C-channel grooves hold PCBs securely at 90-degree intervals around the tube
- 8mm JST connector cutout for wiring access
- 60-degree FOV chamfers on outer lips to avoid obstructing the radar beam
- Structural fillets throughout for print strength
- Chamfered bore lead-in for easy installation onto tube
- Print two brackets and install them flipped at each end of the radar board stack
Print Settings:
Material: ASA recommended (outdoor use, UV and moisture resistance) but only tested with PETG so far.
- Tested on: Prusa Mini+/PETG
- No supports needed
- Bore prints to ~25.4mm for a snug sliding fit on standard 1" tube
Dimensions: 54.8 x 54.8 x 8.0mm
Bore: 25.6mm (printed at ~25.4mm for me)
The included Python script (build_mount_v8.py) uses CadQuery to generate the bracket parametrically. You can adjust tube size, wall thickness, PCB dimensions, and other parameters to suit your build.