MF-A05 CREWORKS Ultrasonic Cleaner Knob
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MF-A05 is the number stamped on the back of the knob I made a new one using the old heat insert from the broken
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 46
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Share Alike
About
I bought an ultrasonic cleaner years ago on the jungle site. It arrived with a busted knob, but I didn't want to return it. It worked okay with some glue and CA glue for years. When the heater died in the cleaner, I decided to do some rehab and decided now I might as well make a new knob as I have the correct tools.
I never bothered to see if you could buy another knob, assuming you couldn't. Turns out searching for the injection number on the back will bring them up for about 5-6bucks in the US. Still prefer to print.
After modeling this, I did some more searching, and found this on Thingiverse which is pretty similar, and configurable too! I wanted the challenge of making it as close to original as possible, but check it out if youre simply trying to get back going
https://www.thingiverse.com/thing:4807288
Printing
Orient the back side to the plate. Use support painting to block supports in the smaller regions (your printer should be able to handle this).
I used 4 walls alternating, with 30% gyroid infill.
Top and bottom layers are concentric
I also used variable layer height to get better look on the angled bits.
Printing with Inner/Outer/Inner will yield a better surface finish
I also provided an STL for a cap if you wanted to print it from silver colored filament, I just painted mine for fun.
This is printed from ASA, because thats what was in the printer, but anything will work. In fact ASA is probably terrible in my garage, because I will definitely spray it with carb cleaner on accident.
If you need this model adjusted to work without the heat insert or something else, let me know. I will also leave the STEP file.