Transformers Blaster SS86 scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is my first attempt at recreating Blaster from Transformers. It’s not based on a specific version of the character, but it was designed to scale well with Studio Series 86 (SS86) figures.
All parts are separated by color for easier printing. I used superglue to secure the necessary pieces during assembly.
On the back, you’ll find four 3mm holes designed for M3x10 screws. These screws aren’t required, but they help tighten and strengthen the shoulder joints.
The only detail I couldn’t separate by color is the eyes, so you’ll need to paint those. For the pins, I used 1.75mm filament, inserting and trimming it to size after assembly.
If you run into any problems or difficulties, feel free to leave a comment and let me know.
I don’t recommend printing this model in PLA. I printed mine in PLA and the joints became loose fairly quickly. I suggest using PETG or ABS/ASA for better durability and joint strength.
Head is a scaled version of this here