Meltem G4 compatible Cover for Ceiling Fan (Bathroom)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Meltem G4 cover for ceiling fan install, commonly installed in bathroom ceilings for proper air ventilation.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a compatible model for the meltem g4 series ceiling fan, commonly used in bathrooms to ventilate the humid air out of the room.
On our original cover, the plastic clips broke after many years.. so I decided to quickly model the cover in tinkercad.
I used the chance to add a personal touch to the cover! :D
Print settings:
PETG / PLA are fine
3 walls, balanced profile, gyroid 15-20% infill
I had to print it standing with some supports, but it worked totally fine. The build volume of the core one was just a tad to small. On the CoreOne L you can print it laying flat. (See photo of the slicer)