Brake line clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Press fit clip to hold 5 mm/3/16" brake lines from rubbing.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
Press fit clip for 5 mm brake line. This holder the line away from other part/edge to reduce the risk of rubbing and to hold it in place. It has a clip-in stud to attached to locating holes but I've only had mixed success with it staying in without shearing off - it is mostly effective to provide standoff rather than locating a line.
I printed on a Mini with PLA. A more flexible/tough filament would provide better performance, but it's been working for me for a few years.I might need to be scaled slightly to to provide a friction fit depending on the application.
This is based on the clip design from my '99 Jeep Wrangler. YMMV and use at your own risk.