Brake line clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Press fit clip to hold 5 mm/3/16" brake lines from rubbing.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 16
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Public Domain
Press fit clip for 5 mm brake line. This holder the line away from other part/edge to reduce the risk of rubbing and to hold it in place. It has a clip-in stud to attached to locating holes but I've only had mixed success with it staying in without shearing off - it is mostly effective to provide standoff rather than locating a line.
I printed on a Mini with PLA. A more flexible/tough filament would provide better performance, but it's been working for me for a few years.I might need to be scaled slightly to to provide a friction fit depending on the application.
This is based on the clip design from my '99 Jeep Wrangler. YMMV and use at your own risk.