M5 Screw/Nutdriver (and bigger metric)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screwdriver for M5 screw/nuts, scale it up for bigger sizes. Optimized to be very slim and sturdy. No supports necessary
- Ocena
- 5 / 5
- Polubienia
- 4
- Pobrania
- 43
- Wydruki
- 1
- Wyświetlenia
- 216
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
I made it for being able to screw a M5 nut, which had only a small space for screwing (nut was nearly embedded in the destined place). The screwdriver is hollow so that the screw doesn't get in the way. Scale it up for bigger sizes (smaller won't work, since it is really thin).
Print it upside down (upside down T shape)! Not suitable for nozzles bigger than 0.4mm, the Layer height can be chosen freely (I have printed it with 0.15mm). If you can live with small distortions on the arms, you can print it without supports. Brim is heavily recommended.